Point 2: Before installing the waterproof micro switch, it is necessary to determine the precise position, so that the installation is more consistent and beautiful, and the operation and use process will become more and more accurate and safe. Then, after the safety and stability have been continuously improved, it can be seen that the technical requirements for installation will continue to increase, reaching a technologically advanced level. It can be seen that this must be well grasped in terms of installation accuracy.
Point 3: The waterproof micro switch in the free state should not be directly pressurized during installation, otherwise it will cause damage. Of course, if the waterproof micro switch is installed and used, it will even have a direct impact on the accuracy of its control. Then, it is necessary to master such technical points in all aspects during the installation process.
Waterproof micro switch wiring method
When it comes to the wiring method of the micro switch, it is actually very simple. Generally, the micro switch has three points. One of these three points is the common point, the other is the normally open point, and the other is the closed point. The common point is like the one in the socket. The zero line, the normally open point is the point where the switch is opened so that the current flows, and the closing point is of course the contact that disconnects the current through. Connect the corresponding point to the corresponding location, and you're done. Although the method of wiring the micro switch looks very simple, it is still necessary to make relevant preparations.
The principle of waterproof micro switch
The external mechanical force acts on the action reed through transmission elements (press pins, buttons, levers, rollers, etc.), and when the action reed is displaced to the critical point, an instantaneous action occurs, so that the moving contact at the end of the action reed and the fixed contact point to switch on or off quickly.
When the force on the transmission element is removed, the action reed generates a reverse action force, and when the reverse stroke of the transmission element reaches the action critical point of the reed, the reverse action is completed instantaneously. The contact distance of the micro switch is small, the action stroke is short, the pressing power is small, and the on-off is fast. The action speed of the moving contact has nothing to do with the action speed of the transmission element.
Waterproof micro switch use
The micro switch is small in size, but has a great effect, and can be seen everywhere in our lives. Such as computer mouse, car mouse, automotive electronic products, communication equipment, military products, testing equipment, gas water heaters, gas water heaters, gas stoves, small household appliances, microwave ovens, rice cookers, floating ball equipment, medical equipment, building automation, electric Tools and general electrical and radio equipment, 24-hour timers, etc.
